Apache Technologies Bullseye 3 Instrukcja Operatora Pobierz pdf (Strona 6)

8 9

Operation

Power: Press the power switch on the touch panel to turn the

unit on. All the LED's will light brieﬂy, then each LED grade

display row will turn on then turn off from top to bottom. Then

each status indicator will turn on and off. The current deadband

status and on grade location will momentarily display. If the

receiver is out of a laser beam, the center green LED will ﬂash to conﬁrm power

is on. If the receiver is in a laser beam, a corresponding LED grade display

will be indicated.

While the unit is on, pressing and holding the power switch and then pressing

the touch panel switches will activate secondary functions which are indicated

by the symbols above the switch.

To turn the power off, press and hold the power key until the LED's are lit, then

release. Settings will be retained the next time the unit is turned on.

Switch Functions

Tilt Indicator: Press the tilt indication switch to turn the display on

or off. The LED status indicators will display a rolling sequence.

When the function is turned on, the LED's will sequence from

the center outward. When turned off, the LED's will sequence

from the outer LED's inward.

When on, the LED's will provide 5 channels of tilt

indication. The center LED will be on when the blade

or dipperstick is within the tilt accuracy setting. The

right side will light when the operator's right side of the

blade or dipperstick is low. The left side will light when

the left side is low.

Initially the blade tilt indication is set to level. It can be

set to match the current blade slope. See installation

notes on Page 15.

Tilt Indicator Accuracy: Accuracy can be set to ﬁne, standard or wide. Press

and hold the power switch and then press the tilt indicator switch to select and

cycle the tilt accuracy function. The current selection will ﬂash rapidly. Pressing

this switch combination while the status LED is ﬂashing will change the current

selection, sequencing from ﬁne to standard to wide to ﬁne, etc.

Operation

Center / Offset On-Grade Location Switch: Center on-grade

is selected for typical grading or cut/ﬁll operations. This mode

indicates an equal amount of grade information above and

below on-grade. Offset on-grade is selected for typical excavation

operations. This excavation mode gives more information and

a larger display area above on-grade. This mode also enables

the plumb indication which shows the operator when the mast

and receiver are perpendicular to the ground (plumb) for more accurate grade

readings. Each selection uses a different array of LED's

Pressing the switch once ﬂashes the LED of the current on-grade location.

Pressing the switch again while the LED is ﬂashing changes the selection.

Fine

± 0.5º

Standard

± 1.5º

Wide

± 2.5º

Plumb Indication: The plumb indication shows when the mast and receiver

are perpendicular to the ground or beyond the selected deadband range. The

grade display LED's will ﬂash quickly when the boom is extended, and will ﬂash

slowly when the boom is retracted beyond this range. The LED grade display

is solid when the boom is within the plumb range setting.

Plumb Indication Accuracy: Accuracy can be set to ﬁne, standard or wide. Press

and hold the power switch and then press the on-grade location switch to select

and cycle the plumb accuracy function. The current selection will ﬂash rapidly.

Pressing this switch combination while the status LED is activated will change

the current selection, sequencing from ﬁne to standard to wide to ﬁne, etc.

Center

On-grade

Selected,

Plumb Off

Center

On-grade

LED's used

Offset

On-grade

Selected,

Plumb On

Offset

On-grade

LED's used

Fine

± 0.5º

Standard

± 1.5º

Wide

± 2.5º

Solid

LED's

Slow

Flashing

Fast

Flashing

1 2 3 4 5 6 7 8 9 10 11 12 13

Komentarze do niniejszej Instrukcji

Brak uwag

Apache Technologies Bullseye 3 Instrukcja Operatora Strona 6

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Odbiornik Apache Technologies Bullseye 3